For about two years, I've had a pair of KRC2s in my SO2R station, each driving a WX0B switching matrix for W3NQN filters. They have worked fine. Friday, our power was off so that PG&E could do some maintenance, so I pulled power from a bank of power pole outlets that feeds one of the KRC2s to minimize discharge of my backup batteries. After restoring power, the KRC2 has failed, in the condition that the WX0B matrix (only relays) does not pass signal. If I remove power from the KRC2 the WX0B box does pass signal.
Any ideas as to what would cause this failure? 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
