Joe's selection of points to connect is good IMHO. I believe you want the point to be after the muting.
73, Don W3FPR On 5/7/2012 11:57 AM, Joe Subich, W4TV wrote: >> It seems that the W3FPR circuit and a 1/8" jack next to the keyer >> jack would work. Audio could be tapped off of the (input/output) of >> the existing LM386 through a suitable cap. - I think. Any thoughts?? > Since you specify the W3FPR circuit and "fixed level" audio, you would > want to make any connection *before* the AF Pot. My guess is that the > best results would be obtained by connecting the W3FPR circuit across > the AF Pot (pins 2 and 3 of P1 on the RF board) exactly as the circuit > is used in the K2. > > 73, > > ... Joe, W4TV > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
