Hi to all guys of like to experiment in their K2, I was inspired by
un-mod kit that was posted on the reflector a few weeks ago....
I did mine. So when I want to remove a module to isolate a problem,
or simply to make more space to work in the K2 when trying some
experimentation, simply replace the module removed with ready
homemade jumpers !!!
Some jumpers, like one for the KSB2, contain the capacitor. So no
need to remember if we need something else!!! Some jumpers that I
made are shorter than the connector inside the K2 because there was
no need for the purpose to be longer... this is why I marked them all
with a red dot, to make sure there were installed all aligned on PIN1
of each connectors inside the K2.
If you want to see my little survival un-mod kit.... follow my link...
http://homepage.mac.com/jfmenard/PhotoAlbum29.html
73 and good experimentation !!!
======
Jean-François Ménard / VA2VYZ
======
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
