Jim, That is what I plan when I get a "round tuit"
73, Don W3FPR On 5/14/2012 1:05 PM, James Robbins wrote: > Wayne, > > > > I saw your below note on setting up a foot switch PTT via the ACC2 jack. > > > > As an alternative, and if I am not using the MH3, is there any problem to > accomplish the same PTT function by building a jumper from a TRRS 3.5mm plug > (into the MIC jack) to two mono in-line jacks where the pins of the plug are > split into the two which support the mic (tip and sleeve) and those which > support the PTT (ring 1 and ring 2)? I'm planning to use a Heil > headphone/mic with a foot switch for home use. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
