Tom, THANK YOU! I bet that's it. I was messing with the filters today.
And I don't really have an understanding of them yet. I thought I had put
them back to what's in the manual. Opps
Hey, at least I know now that it's not just some bad acid trip I don't
remember taking! hi hi
Roland
----- Original Message -----
From: "Tom Hammond" <[EMAIL PROTECTED]>
To: "Roland & Elvie Whitsitt" <[EMAIL PROTECTED]>;
<[email protected]>
Sent: Friday, August 12, 2005 2:58 PM
Subject: Re: [Elecraft] Inverse sidebands today?
Hi Roland:
At 04:31 PM 8/12/2005, Roland & Elvie Whitsitt wrote:
I'm not sure if I'm losing my mind or what's going on. I'm hearing upper
side band on 40 meters and lower side band on 20. If this is normal then
I am tripping in some alternate universe. Or is something amiss with the
k2?
Though I can't be absolutely certain, I'd bet you set your SSB filters (at
least SOME of them) up to have them centered on the WRONG SIDE of the xtal
filter center point. This will cause you to receive SSB on the wrong
sideband.
Switch to 40M, then go to MENU | CAL | FIL and step thru your SSB filter
settings.
If the frequencies (or DAC values, either one) for LSB are HIGHER in value
than those for USB, you have them reversed.
73,
Tom Hammond N0SS
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
