I use PSK - D with Kcomm or K3 utility all the time for rtty . Can you tell me what your indicated K3 voltage is on K3 screen? What is the indicated voltage on 25w key (cw constant keyed) on K3 screen? Do you have a Coilcraft DLFC15 filter in your rs232 line?
Adrian ... vk4tux -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, 30 May 2012 11:13 PM To: [email protected] Subject: [Elecraft] K3 psk D splater Last evening I was trying another aspect of my K3 I often work PSK using AFSK but I thought Id give it a try using PSK-D using Kcomm I set everyting and it was decoding fine on the K3 display and in Kcomm. There was a strong station that was calling CQ so i gave him a call while having a good QSO he mentioned that I was splattering a bit and I should not drive as hard. rather than explaining that I wasnt using AFSK I just quickly said thanks Ill look into it and 73. Question, What can cause splatter when using PSK-D I had the power dialed to 25W so I certainly wasn.t running to much power, and just to be sure that I was actually using PSK -d I had pulled the audio line in/out from the K3. Am I missing something? I will be trying again hooking my other rig up to another computer so that I can monitor my output in Fldigi, just in case he was seeing issues at his end. David Moes VE3DVY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
