The mystery was solved! I totally forgot the K2 took a 'header' off the table when some yutz was grabbing some feed line and the radio landed on it's back during field day. When I took the radio apart today I could see the speaker didn't look right. I installed an elecraft replacement speaker and it sounds as good as new, thanks guys!
----- Original Message ----- From: Ron D'Eau Claire <[EMAIL PROTECTED]> Date: Friday, August 12, 2005 1:00 pm Subject: RE: [Elecraft] Semi-Hypothetical Question > It sure sounds like a zapped speaker! > > Ron AC7AC > > -----Original Message----- > From: James Kern [mailto:[EMAIL PROTECTED] > Sent: Friday, August 12, 2005 9:28 AM > To: 'Ron D'Eau Claire' > Subject: RE: [Elecraft] Semi-Hypothetical Question > > > Ron, > The K2 is definitely hearing like a hawk.. It has no problem > hearinganything, it's just that after the accident (caused by a > classic case of > field day sleep deprivation syndrome) the audio sounds crappy. I'll > definitely try the headphones tonight to see if there is a > difference and > I'll report back my results. Luckily I have a spare K2 speaker > just in case. > > > James Kern KB2FCV > www.kb2fcv.com > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Ron D'Eau > ClaireSent: Friday, August 12, 2005 12:02 PM > To: 'Elecraft' > Subject: RE: [Elecraft] Semi-Hypothetical Question > > > James, KB2FCV wrote: > I forgot to turn the RF Gain down on the K2 and it took a full > blast (with > the volume turned pretty far > up) hit with the RF Gain all the way up due to being up all night > workingCW. Then after that the K2's receiver just doesn't sound > the same, strong > signals will just sound over driven.. like a speaker is blown or > something.What kinds of things could have happened and what kinds > of things would be > good to start looking for? > > ---------------------------- > > The RF Gain control in the K2 does not protect ANYTHING except > maybe the > loudspeaker. In the K2 what is called "RF Gain" is actually a > manual I.F. > Gain control, changing the amount of gain of the I.F. amplifier > just like > the AGC does. On a K2 the only control over the gain up at the > antenna input > is done by switching in or out the attenuator or the preamplifier. > > If you damaged something in the front end, you can expect the K2 > to be > uniformly deaf across all the bands. It wouldn't cause audio to be > distorted. > > Check your audio with the phones. If they sound FB, you blew the > speaker.Even that is a surprise. The K2 audio channel was designed > for low current > drain so it isn't exactly high-powered! Still, anything can happen. > > Ron AC7AC > > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > > > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com

