Chuck, That LPF is the most common downfall of the KXB3080 installation. It is small and quite compact, and does require a lot of careful work.
I am glad to hear your KX1 is now working OK. 73, Don W3FPR On 6/4/2012 10:48 PM, hawley, charles j jr wrote: > Fixed. > It was a solder connection on the low pass filter board. When the ATU > pushed a bit on the LPF board, the power took a dip. > I re-soldered the two 2-3 junctions on the LPF. > The power is constant now, about 3.6 or so on 7 thru 14 > and about 4.1 on 80M with the tuner in or out. > It was all in the LPF board...both issues. I was really > careful with that part...but not careful enough :) > Thanks again. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
