Thanks Don! All that tried already, should have mentioned it, too, sorry. Dick, K6KR, already contected me and suggest the only way to be really sure there's no hardware problem (i.e. some defective cells in the EEPROM chip) is to do an EEINIT. Will do that next week when back from "radio holiday" and not needing the radio daily as it is right now.
73, Olli - DH8BQA ----- Original Message ----- From: "Don Wilhelm" <[email protected]> To: "Oliver Dröse" <[email protected]> Cc: <[email protected]> Sent: Tuesday, June 05, 2012 3:16 PM Subject: Re: [Elecraft] K3 Utility: Problems saving K3 configuration > Olli, > > If you have not yet done so, shut everything down, re-boot the computer > and try again. Be certain you are saving the configuration file to an > area where you have permissions to save. > > 73, > Don W3FPR > > On 6/5/2012 8:45 AM, Oliver Dröse wrote: >> Hi Bill, >> >> sorry I didn't mention it: Yes, using the latest K3 Utility, downloaded >> and >> installed before upgrading to 4.51. Let's see if any other suggestions. >> >> Thanks& 73, Olli - DH8BQA >> >> >> > > > ----- > eMail ist virenfrei. > Von AVG überprüft - www.avg.de > Version: 2012.0.1913 / Virendatenbank: 2433/5045 - Ausgabedatum: > 04.06.2012 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
