Randy, Thanks that was the ticket! Really appreciate it. Keith From: Randy Farmer Sent: Saturday, June 09, 2012 2:20 PM To: Ham Radio ; elecraft@mailman.qth.net Subject: Re: [Elecraft] 2m Transverter keeps switching back to 6m
Are you running NaP3? I encountered the same thing and found you need to go into the NaP3 setup and set the highest frequency to 148 MHz. It's 54 by default, so the rig control function of the software will always QSY you to 54.000 until you change it. If you're not running NaP3, perhaps whatever rig control software you use needs a similar setup change. 73... Randy, W8FN On 06/09/2012 16:02, Ham Radio wrote: Quick question. My K3 keeps switching back to 6m when I turn it to 2m. It will go to any frequency on 2m and then a second later switches back to 54.0 MHz. Any thoughts? In the middle of the VHF contest, will look this up in parallel. Thanks, Keith ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html