ACC2 IO setting > LO=PTT (input; apply 0 V or ground to activate PTT)
> I can't figure out how to set the ACC2IO on the KX3 so that it will key the KPA500 properly. I currently have the >ACC2IO in the off position. When I connect the cable between the ACC2IO and the PA Key on the back of the KPA500 it puts >the KPA500 in a transmit mode. I have to manually put the KPA500 in standby to receive and then Operate to transmit. I >have tried a number of different settings on the KX3 and KPA500 with no success. What am I doing wrong? (incidentally >the KX3 will drive the KPA500 to almost 200 watts output). >Dave WA6DKN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
