Noted in the "tips" the following: -------------- Here are the conditions under which TX current is reduced:
1. 5.0 W or less in CW, FSK-D, and FM modes when key-down supply voltage is 11 V or higher -------------- Can I take from this that FM Mode has been implemented in the KX3 firmware? It hadn't in earlier versions. This would be good news since I will immediately be using my KX3 with a 144-28 transverter on 2m-FM when I have the KX3 constructed and installed in the shack. No this is not the KX3-2M module should anyone ask. Hope that will be coming out soon for beta-test. I should have my KX3 by July 2nd (at latest). 73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-? DUBUS Magazine USA Rep [email protected] "Kits made by KL7UW" http://www.kl7uw.com/kits.htm ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
