1) The KAT500 will follow the K3's band lines on the ACC connector. If you don't wire the band change lines, the KAT500 will learn of band change and will switch bands (and antenna) on first transmit.
2) You'll need to tune, but "bypass" is the first setting attempted. You might consider moving your other 30/40 switch to be before the ATU so that it chooses between 30 and KAT500. 3) Both. The normal behavior is to return to the last antenna used on the band. I want to offer a configuration option to set a "preferred" antenna connector per band, so it switches there on band change rather than the last used. This might help if you use multiple antenna connectors on any given band, but always want to start out with a specific antenna on a given band. 4) Yes, there's a microcontroller, an RS-232 port serial command set, and a KAT500 Utility. There will be a programmer's reference. It's not yet ready yet. You'll be able to select antennas, view and change all the relay settings (and see the L and C values chosen and have a way to "tweak" them). 73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Phil Hystad Sent: Friday, June 22, 2012 1:48 PM To: <[email protected]> List Subject: [Elecraft] [KAT500] Planning for KAT500 I am on the waiting list for my KAT500 -- waiting - waiting - waiting But, in the mean time I am planning for how I want to arrange the switching of my various antennas. I understand the KAT500 has 3 antenna connections so first a couple of questions: 1. Will the automatic features of the tuner include automatic band switching ? That is, if I am operating on my 80 meter dipole and then I switch my K3 to the 20 meter band will my 20-meter Hexbeam automatically be switched in (assuming I have it also connected to the KAT500)? 2. I have four antennas: 80-meter dipole, 40-meter dipole, and 30-meter dipole, plus my Traffie Hexbeam that handles 20 meter through 10 meters. I would like to hook up permanently my 80 meter and the Traffie hexbeam to two of the KAT500 antenna connections and then also switch in the 40-meter dipole and 30-meter dipole into the third antenna connection on the KAT500. So, let's say I am on 40 meters and I switch to 30 meters but I need to also manually switch my 40-meter and 30-meter since they share the same port. Will the KAT500 know how to handle this? [Note: my 30-meter dipole though is 1.3:1 and better across the entire 30-meter band so maybe I don't even need the KAT500]. 3. How do I tell the KAT500 that the five bands (20m thru 10m) are found on one given antenna connection (to my hexbeam)? Or, does the KAT500 learn this or do I manually help it out by some stored assignment. 4. Which brings up my final question: will the KAT500 be a "smart" device with a computer interface like many other Elecraft devices? Is this how I might preset bands to be associated with antenna connections. Note, my 80-meter dipole can actually work well on 40 and 30 but not as well as my 40-meter and 30-meter dipoles. 73, phil, K7PEH ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
