My K-1 quit (no TX, no RX) a few months ago and am just now getting around to working on it.
It is a 2-band kit with 20 and 40 installed. Originally set up for [email protected]; [email protected]. I removed and replaced the filter board. RX, TX fine except the range is now 14.047.3 - 14.075.1 and 7.053.6 - 7.081.3. Spread the turns of L1 and could get to go as low as 7.0361 and as high as 7.0640. These frequencies agree with a good receiver and a good signal source. I'm reluctant to snip off a turn from L1 since it worked fine before with the current number of turns. A concern is the lack of tuning range. VFO OSC is 3.027 - 3.055. I'd be grateful for advice. 72, Tim Colbert K3HX ____________________________________________________________ 5 Diet Pills that Work 2012's Top 5 Weight Loss Pills. Updated Consumer Ratings. Free Report. http://thirdpartyoffers.juno.com/TGL3131/4fe7881a437cfd75d18st01duc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
