Steve, Is this a separate KIO2 option, or are you referring to the RS-232 function on the KPA100?
If it is the KIO2 option, I can give you some tests that can be used with DC signals and a DMM - unfortunately the same scheme does not work with the KPA100, and the easiest way to troubleshoot it is to use an oscilloscope. 73, Don W3FPR On 7/2/2012 5:00 PM, Stephen Roberts wrote: > I just purchased a KPA100 from someone on the list and got it installed and > working fine, but I can't seem to get the KI02 going. I'm using a Mac and > Aether software. I set everything correctly in the software and nothing. I > tried Mac logger deluxe and the same result. Checked the KUSB cable that I > got from Elecraft as well as the cable I built that came with the KI02 kit > and they check out ok. What should be next on my list of things to check? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
