Guy, That would still only give a picture of the K3 output as found by the IF leak-through signal. I think a better approach is to wait until the external sensor is developed and released - that will show the real signal going out to the antenna.
73, Don W3FPR On 7/3/2012 9:55 PM, Guy Olinger K2AV wrote: > Wouldn't part of displaying the TX signal have to be implemented in the K3? > If so it's a TWO box modification. Fix the K3 to send the TX signal > across the connector to the P3 instead of the RX bandwidth. Then the P3 > would need to switch to the bandwidth needed to display the TX signal when > the K3 was in transmit. This last because most of the time we are watching > on the P3 where we are NOT listening with the K3. > > Some other way to do that? 73, Guy. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
