Steve, Is the selected antenna port (ANT1/2) connected to a dummy load? Set the ATU menu to CAL and try again. Check your coax - continuity check from end to end on center conductor and the shield. Infinite resistance between center and shield.
If you still have problems with good coax, a dunny load and the correct ant port selected, the most likely problem is that diodes D1 and D2 may have taken a static hit - they are a bit "tender" 73, Don W3FPR On 7/6/2012 3:45 PM, Stephen Roberts wrote: > Just got a KTA100 from someone on the list and have some problems. Tuning > seems to progress along nicely, but always indicates SWR off the charts. Any > ideas what I'm doing wrong? > > Steve > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
