Hi, Melin: Make sure you do NOT have either RIT or XIT enabled! That will cause exactly the symptom you are experiencing .
Since the same BFO and Local Oscillator is used for both transmit and receive, those frequencies will be identical. The only thing that a misalignment in CAL FIL should cause is a shift in the apparent bandpass, not a shift in frequency. Since FL1 is *always* used for transmit, if you select FL1 for receive too nothing at all should change between transmit and receive - not even a shift in bandpass. Ron AC7AC > > My K2 (2631) with KSB2 doesn't transmit and receive on the same > frequency. There's about a 70Hz difference on lower sideband and 50Hz > on upper. The > transmit frequency is always lower than the receive frequency. > > Carrier supression is great, transmit audio sounds good, and I'm > within no more than 100Hz away from the suggested frequencies. The > package came with > 3.6Khz markings. > > I've run Cal PLL a number of times. The VFO is accurate and linear. > It just won't transmit and receive on the same frequency. > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
