A fellow Elecrafter gave me his number and i called him because i wasn't making any progress with the problem of keying the radio with the WSJT program. What it came down to was in the configuration table for WSJT. There is a place for "PTT" port and mine was set on 0. I suspected that might have something to do with it but had no idea what should be in there. Ken said his was 3, what a magical number! It worked for me as well. So now the radio goes into transmit mode as it should. End of one problem.
I am using the Data A mode, USB, Mic-Line is set to ON, VOX Gain at 10, Antivox 000, TX delay 008 (min), PTT Key RTS-DTR Now what happens is that it transmitts the message i have selected and right about the 48 second mark it drops, then a few seconds later it keys up and starts resend the message again but stops when the clock hits 00 and goes into receive mode. If i was a kid this would be easy but being an old F*** its a bit more time consuming so i appreciate any all exibitions of patience. Larry W0OGH ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
