I would like confirmation on how the K1 is configured for 2-bands, 4-bands, and 6-bands. I heard that for some of the configurations you must swap out boards. Now, I think that this occurs when your order the two band version originally and then get the 2-band option. I heard that these two boards occupy the same slot so if you want to have four bands without having to swap boards you should buy the 4-band version of the K1 to begin with.
Similar question for the 4 band version and the use of a 2-band option board given a total of six bands. In this configuration do you need to swap out the 4-band module board and swap in the 2-band in its place to operate the 2 bands on the 2-band option board. Does any of this make sense? I would appreciate it if someone would confirm the way this works. My original plan was to get the 2-band K1 and get the 2-band option later but if this requires swapping boards I would likely get the 4-band option to begin with (maybe). Thanks, 73, phil, K7PEH ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
