The temporary solution to the problem is to disable the data display before entering SPLIT mode. It appears that it WILL remain in SPLIT when you re-enable the data display .
Jim - W0EB >The problem I reported IS global. It occurs on all bands. With the P3 SVGA's >data display enabled, it seems to inhibit the K3 from >actually entering SPLIT >mode even though the "SPLIT" indicator shows in the K3's LCD display. I've >confirmed by measuring the >K3's output with a frequency counter that even >though SPLIT is showing, the K3 is still transmitting on VFO A's frequency. >The >VFO B does not change to RED . The VFO B frequency DOES read the >frequency it's set at and the purple cursor moves >properly as you change the >VFO B frequency. > >FW in use in the K3 is 4.51 and in the P3, Beta 01.17 as reported by both >devices. > >Jim Sheldon - W0EB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
