Jim, you can adjust the volumes independently on the front panel. But you probably knew that. Seems also that there is a config setting that needs to be adjusted for the volume ratio to work correctly - page 37 of the manual.
On Aug 2, 2012, at 10:56 PM, Jim Bennett <[email protected]> wrote: > I just recently added the sub receiver to my K3. I've been using the Sub > receiver (without diversity turned on) and all was fine. I have the Yamaha > CM500 headset - one cable plugged into the Phones jack and the other going to > the Mic jack. I also have an Icom SP-20 external speaker, and it's connected > to the Spkrs jack. > > Well, I engaged Diversity mode and at first thought it was working properly. > But, when I turned the AF to zero on the Main receiver, I realized that the > audio on the Sub was almost nonexistent signals are there, but really, really > weak. OK, so looking at the Config parameters, I noticed in the KRX3 manual > that SPKRS should be set to 1. Mine was set to 2. I changed it to one and now > have zero audio coming from the Sub receiver. Not exactly what I was hoping > for. > > What do I need to do to get my headphone audio in Diversity mode to act as it > does with the Sub turned on, but Diversity off? > > Confused, I am. > > Jim / W6JHB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
