Not sure about the CR issue, but I use vox. You can set your delay to suit semi bk in , but qsk works well with it.
Have you tried the vox setting? If you are trying the keyboard slow it down to your type speed etc, I use 20wpm qsk. No extra character issues using vox in any case. I had a bit of fun using the paddle to send rtty in fsk d before and I was very impressed how well it worked looking at my tx text. It is nice to break the dependency on a pc for this stuff. Adrian ... vk4tux -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Roy Morris Sent: Monday, 6 August 2012 11:35 AM To: [email protected] Subject: [Elecraft] [K3] P3SVGA Data Terminal in CW Mode When I push the ENTER key on my keyboard the CW buffer is transmitted, but there is an extra character (letter) at the end of the string that I did not enter into the buffer. Has anyone else experience this? If so, what did you do to eliminate this unwanted character? In the Transmit Mode and Setup screen I set up the parameters as follows: Transmit Mode = CR Transmit Timeout = 0 Thanks, Roy Morris W4WFB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
