My K3/100 which is set up with the P3 and then goes to microKeyer II will turn back on within seconds of pushing the Power switch. I looked at the nabble posts and tried downloading latest firmware....I was only off one, 4.48; now 04.51 is installed.
I also disconnected the mK II and removed both the RS232 and ACC plugs from the back of the K3. I also removed the power cable from the P3. The rig still cycles back to on within one or two seconds of pushing the Power button to Off. There has been no changes to the rig setup since last March when I set up the P3...no local t-storms, etc. Any ideas? 73 Tom CX7TT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html