Hi Randy - no solution here but just a couple of thoughts of things to check/try - I'm using both HRD and N1MM quite nicely with my K2.
Did the KIO2 ever work? Is the "special" KIO2 cable properly constructed? Check that the port is actually on in the K2 menu Check that the KIO2 is actually working by using the terminal program as described in the manual - possible that the little bitty choke in the KIO2 is blown?? Check the settings of your COM port using the windows (I'm assuming you are using windows here) device manager to see that you actually are using an active and available COM port (for instance, on one computer I use a USB to serial converter and windows places that resulting port at COM4) I've found that setting N1MM to 1 stop bit works as well or better than the 2 stop bits that seem to be the default. Unless there is something very exotic about your setup, there is a solution to this vexing problem! 73 es gud dxing -- Don N4HH, K2/100 #2028, KAT100, K1 # 1456, etc, etc! ----- Original Message ----- From: "Randy Johnson" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, August 30, 2005 4:28 AM Subject: [Elecraft] rig control I have been able to connect my IC-756PROII to the Ham Radio Deluxe rig control software but when I hook up the K2 cable it will not connect. I use the N3FJP logging and contest programs and none of them are able to poll the rig either. Nor could I connect with N1MM. Ideas? Randy W6SJ K24878 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/05 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/05 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
