I need help setting up WriteLog ver11 to toggle The KDVR3. Based on the manual, I've set keyboard shortcuts for four unused keyboard characters: ( [ ), ( ] ), ( \ ) and ( = ). WriteLog accepted these as:
Rig1Command(10) Rig2Command(11) Rig3Command(12) and Rig4Command(13) I then added the following K3 KDVR3 commands (i.e. SWT21 should toggle M1) to writelog.ini that resides in the Windows file: [Elecraft_K3_Commands] Macro_10=SWT21; Macro_11=SWT31; Macro_12=SWT35; Macro_13=SWT39; When everything is up and running, I get the following indications when I press the keyboard shortcuts: [ -> Error result 1 sending rig command (10) ] -> Error result 1 sending rig command (11) \ -> Error result 1 sending rig command (12) = -> Error result -3 sending rig command (13) Note: the WriteLog K3 interface driver is working FB for logging, Frequency tracking and CW messages for F1, F2 . etc. The K3 firmware version is 4.39 and the hardware interface is a microHam USB Interface II (serial# 001) That's it in a nutshell. Thanks in advance for any help from the Elecraft blog. 73, Fred, [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
