I'm surprised nobody has mentioned the KRC2 .. red-headed stepchild of
the Elecraft line ;)

I use a KRC2 with a K2 to switch 6 microwave bands in the Jitney ..
903 through 10G. The radio displays the correct frequency with the GHz
lopped off. I reprogrammed the KRC2 (no programming required, just run
a commandline utility) such that it turned on 2 source and 2 sink pins
per band, with another pair of source and sink which turns on for any
microwave band. The outputs of the KRC2 can do a few hundred
milliamps, but the total package power is probably limited to under an
amp (e.g. use drivers for stuff that uses more than a few 10s of mA).
I drive two 1P6T relays plus some logic and a bunch of DEMI relay
boards.

It's not out-of-the-box, but it's been very reliable .. you'll likely
need to be able to do simple "glue" circuitry, diode or gates,
drivers, etc to make a complete solution

de w1rt/john

On Sat, Aug 11, 2012 at 2:59 AM,  <w...@iw.net> wrote:
> I would like to use my K3 as an IF radio for
> some VHF+ transverters.  I have transverters
> for 8 bands, and it would be great if the set
> up included automatic bandswitching of the
> transverters, amps, PTT lines, etc.  Is there
> anything out there that can handle this?
>
> I spend over 300 hours per month at work,
> so I don't have time to learn how to program a
> PIC, etc.
>
> Thanks & 73,
>
> Arliss  W7XU
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to