Hello, I am trying to create a K3 remote control command string (or macro) to turn on/off the text decode. The K3 release notes and the programmers manual show this is possible, but I can not get it to work. Back in 2008, the release notes for (MCU 1.68) highlight that the "UP" and "DN" remote control commands now work for parameter setup, such as NB, TEXT DEC, DATA MD, NR ADJ, etc. Adding 'B' (e.g., "UPB;", "DNB;") controls the VFO B parameter; otherwise, the VFO A parameter is controlled. With my "Text Dec" set at "CW30-90". I have tried this command string SWH40;DNB;DNB;DNB;SWT40; to hold the TEXT DEC, turn vfo b three selections, and tap TEXT DEC. The SWH and SWT commands work but the vfo commands do not. Maybe, I am missing something? Can anyone else confirm that these "VFO UP/DN Parameter controls" work in K3 Release 4.48 or higher? Thanks for your help, 73 - Dave W9RIT K3 #3177
-- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Macro-with-UP-DN-parameter-changes-tp7561239.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
