Hi Mike, Roy's asking about K3 macros, as described on pages 5 and 6 of the "K3 and KX3 Programmer's Reference".
I don't know that there's a "definitive" list anywhere, but Google found some, including: http://www.ke7x.com/home/k3-macro-repository http://gm0elp.blogspot.com/2010/03/elecraft-k3-macros.html Seems like this would be a really good application for a wiki, but I think the Elecraft wiki that was around a few years ago died off ... (?) 73, ~iain / N6ML On Wed, Aug 22, 2012 at 6:23 AM, Mike K2MK <[email protected]> wrote: > Hi Roy, > > Here is how I understand the ability to send macros from a PC. Perhaps > others can add to or correct my response. In order to send a macro from your > PC to the K3 and P3 you will need to be running a program that is already > communicating with the K3 over a serial channel. You didn't mention how your > are operating PSK and RTTY. Are you using a PC program or are you using the > internal capabilities of the K3? If the latter and if you have the SVGA > board in your P3 and have an external monitor and keyboard attached then I > believe that capability is already available to you using the F keys on the > external keyboard. > > Back to the PC. If you are running a program for PSK and RTTY then it would > have to have the capability to send macros built into it. For example > WriteLog and N1MM have that ability. I use WriteLog for CW and RTTY and I > have macros set up on the F12 button and the multiply (asterisk) button of > my PC keyboard. The F12 button activates the K3 auto spotting feature for CW > and also centers the signal on the P3 screen when the P3 is in the Fixed > Tune mode. The multiply (asterisk) button toggles the APF function when in > CW and toggles the dual passband function when in RTTY. > > 73, > Mike K2MK > > > > Roy Morris-6 wrote >> >>>From time to time I have seen some macros for shortcuts to various K3 >> functions. At the time I did not pay enough attention and did not copy >> them >> down. I wonder if there is a comprehensive list somewhere for the K3 >> macros >> and also a list for macros used by the P3 in the data modes. I would like >> to assign some standard macro information to the F keys on the keyboard >> while in PSK31 and RTTY modes. Thanks for any help. Roy W4WFB >> > > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-List-of-Macros-tp7561438p7561464.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
