Thanks for the warning! This is really good guidance.
Your new cable set package will solve all the "problems" -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Eric Swartz WA6HHQ - Elecraft Sent: Wednesday, August 22, 2012 7:59 PM To: [email protected] Cc: [email protected] Subject: Re: [Elecraft] 2.5mm 3conductor RX I/Q to 3.5mm 3conductor soundcard line input cable We -strongly-recommend that 2.5mm to 3.5mm adapters are not plugged directly into the IQ jack on the KX3. They can easily damage the jack if they are bumped, due to their longer lever arm when sticking out of the jack. The 2.5mm to 3.5mm cable in the KX3-PCKT has a molded 2.5mm right angle plug that minimizes the chance of damaging the jack. 73, Eric www.elecraft.com _..._ On Aug 22, 2012, at 3:00 PM, "Lance Collister, W7GJ" <[email protected]> wrote: > Hi Kevin, > > I just use a standard 3.5 mm stereo cable with a 3.5 to 2.5mm adapter plug on one > end. Got them both at the local Radio Shack, but other stores carry these cables > and little adapters. GL and VY 73, Lance ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
