The symptoms I explained earlier were after an electrical storm that also took out my cable modem and wireless router. The K2 was connected to its antenna but was turned off at the time. It also had the KPA100 and KAT100 installed. I decided to remove the KPA100 and KAT100 to see if I still had the problem with the basic K2. I wanted to see if the high current warning was still there. The high current warning did not come on but the power transistors became very hot very quickly. I was not transmitting. That led me to believe that the power transistors were defective. There very well could be problems with the KPA100 as well. Now I'm not so sure.
Brent WB4X ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
