Hello,
I got a K3 kit in April which included the K144XV. It went together fine and had about 10 watts output on 2M. I made a few FM contacts and a couple of SSB contacts, the last one in the June VHF contest. I tried 2m again this month and noticed the power output only about .5 watt max. The K144XV utility in the command tester shows P006 with key up and P011 in key down. The T command shows T76C key up and T32C key down. Current is about 1.25A key up and 2.5A key down. Any ideas as to what might have happened? I checked the coax from the the 2m module to the output connector on the K3 and it is fine. Where can I get a schematic of the module? Thanks, Al K7CA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
