I found the problem with the SSB adapter. I installed the comparator backwards. I never do that! I have a new one coming from Elecraft.
I have an Alinco mike off of a two meter rig. I have used the Alinco mikes wired for Kenwood in the past on other rigs and also on the K2 that I had. I have also made up a PSK31 cable for it. I have been able to get output from the SSB portion via the PSK cable but not the mike. I have not got the 5 volts jumpered for the mike and I am not sure that it is needed. The mike does have a touch tone pad on it, but not sure that it has a pre-amp for the mike portion. If I take an audio source from the PC and feed it via jumpers to the pin 1 and pin 5 (audio and ground) to the mike plug, the radio will transmit voice. I also made the PSK cable using a 1:1 audio transformer on the audio out/mike in and can make PSK contacts no problem. The PSK transmit audio sounds very clean. So, think I should hook up the 5 volts to the mike and see what I get? Jess AE0CW. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
