Hi Eric, Thanks for this information. I'll drop the idea for now - but could you or Wayne think of some alternative way to trigger the "external amplifier active" mode in the K3? It would really be useful, I've nearly melted my amplifier a couple of times.
73, Thomas M0TRN On 4 September 2012 16:15, Eric Swartz WA6HHQ - Elecraft <[email protected]>wrote: > I apologize, but we -strongly- ask that people do not try to send their > own auxbus signals to the K3. This is a critical proprietary timing > component of internal K3 operation and improper use will cause serious > problems for the K3, including possible damage of internal components > during disturbed T/R timing. Its is not a simple serial interface. > > Also, additional non-Elecraft products loading down this bus may cause > serious timing errors inside the K3. This will cause all sorts of strange > and intermittent problems. > > This is one area of modification that will void the warranty when problems > arise. We are not set up to support any user questions or problems in this > area when non-Elecraft equipment is hooked up to the auxbus pin. > > 73, > Eric > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
