Tjhe current P3 goes down to an IF of 455 kHz, no need for ny P3 upgrades or modifications as long as the traneiver has an IF output.
73, Don W3FPR On 9/8/2012 10:31 PM, Kevin Stover wrote: > If I'm not mistaken the P3 either does or soon will support the K2's 4.915Mhz > IF. > > The "problem" is getting that signal out of the radio. > > K8ZOA at Clifton Labratories makes a buffer amp for doing just that. It's the > Z10000B. I have installed one in my K2/100 and use an LP-Pan and computer to > get a pan adapter display. > > If the P3 supports the K2 Intermediate Frequency it should work...without > LP-Pan and computer. > > > On Sat, 08 Sep 2012 19:26:00 -0400 > Tom McCulloch <[email protected]> wrote: > >> Can the P3 be used with the K2? If not is there something comparable >> out there? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
