Curt, Those reports of oscillation in the archives are only a few scattered reports and can usually be attributed to build errors or early problems that have now been corrected. The KPA100 design was changed (in 2008 IIRC) to cure those oscillations.
Your friend whose 40 meter SSB is weaker than his other radios could be due to either the audio drive and compression he is using, or could be due to the calibration of his KPA100 wattmeter. It is difficult to answer that concern unless I have the specific K2/100 on my workbench. The KSB2 does not need to be re-configured when adding the KPA100. Just follow the instructions for the KPA100 installation (be aware of the Serial number for your base K2 and follow the appropriate set of instructions). 73, Don W3FPR On 9/10/2012 12:42 PM, Curt wrote: > I built K2 s/n 06424 with KSB2 awhile ago, and am considering adding a > KPA100. Wonder whether this will just foul up a good radio. I recall > reading about oscillation and other problems with the 100W addition to the > K2. Now, I am using a 30 year old radio for QRO SSB, but of course it > lacks WARC and takes up a lot of space I'd like to reclaim. > > Appreciate knowing whether the issues have been ironed out and any advice > about making this change. In particular, I have talked on air with a friend > who owns a K2/100 and his SSB signal on 40M is always weaker than any other > rig he uses. Will the KSB2 need to be reconfigured after adding a KPA100? > I'm mostly a CW op, but like to work phone sometimes also. > > Also, what else would I need to add to facilitate computer control and > PSK31(which I only use rarely) using the K2/LPA100. My ultimate goal is a > single small size rig and laptop on the desk, with everything else clear. > > Bottom line, is adding a 100W amp to what was originally a great QRP rig > just asking for trouble? > > 72/73 Curt KB5JO > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
