Ken, The manual says there is a missing echo from a DSP command. Reload the DSP firmware (download a fresh copy from the Elecraft website, yours may be corrupt). If that does not correct it, it is time to contact support.
73, Don W3FPR On 10/3/2012 1:56 AM, ken brookner wrote: > I'm getting these errors intermittently--only twice now about a week > apart. K3 seems to be working ok, including the SUB. I reloaded all of > the firmware after the first instance. I'll leave the radio on while I > eat dinner or something and when I come back a couple of hours later I > might have this error. I'm using Dxlab's Commander to control the rig. > > K3 includes: > > KAT3-F > K3/100-F > KXV3A > KRX3-F > KBPF3 (2) > KDVR3 > > I built my first one, but had the factory build this one. What do these > errors mean? K3 has the latest firmware available through the K3 utility. > > Thanks! > Ken, KY5G > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
