Gil and others, I can just recommend to follow Don's article. It has worked very well for me. What has worked best for me was to use the "N6KR method" to calibrate the reference oscillator (with WWV at 10Mhz). I carried out about 4 iterations for matching the 2 frequencies between TP1 and TP2. At the end, I had to set both frequencies not to exactly the same frequency, but TP1 to -30Hz in order to get the most accurate frequency reading across all bands. Note you cannot get closer than +-10Hz with the K2.
Thanks, Andy, KU7T -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Thursday, October 04, 2012 6:59 AM To: Gil G. Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] [K2] Displayed frequency question. Gil, You will have to do CAL PLL and CAL FIL after properly setting the 4 MHz reference oscillator Control Board C22. The "magic" is in setting C22 properly. To accomplish that, go to my website www.w3fpr.com and follow the instructions given in the K2 Dial Calibration article. 73, Don W3FPR On 10/4/2012 1:00 AM, Gil G. wrote: > Hello, > > When I listen to a station transmitting using CW on, say, 7030 (zero-beat), > my displayed frequency is 7029.93. > When I transmit, the reverse beacon stations show me as being right on 7030 > while my displayed frequency is 7029.93. > When I listen to SSB, station usually do sound perfectly clear at a displayed > frequency 70Hz below their advertised frequency (nets). > > Should I change my displayed frequency? To what? Am I off? > If I move the BFO frequency a bit, would I need to realign my filters? > > Thanks! > > Gil. > -- > PGP Key: http://keskydee.com/gil.asc > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html