Hello, First time posting to the list. Completed K2 #7239 today. Made a contact with a station on cw, 10 watts, 7.1065 mhz. He reported back that my CW signal had a very heavy ripple on the signal.
I connected the output to a Oscilloscope and was able to see a ripple on the waveform when keying a solid carrier at a few watts. Also listened to my signal on another receiver and could hear a very bad modulated CW tone. This is a barebones K2 with no options installed at this point. Every measurement in the testing was all within specs and the alignment of the radio had no problems. Power output on all bands was OK. Thanks for any help in correcting this problem. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
