Hi Mike, I'll take a stab at the first item you described. There is a configuration variable (CONFIG:VFO OFS) that you can turn ON to utilize the RIT/XIT knob to change VFO A frequency. You probably have that ON. Take a look at your K3 frequency as you turn the RIT/XIT knob to verify this. When either the RIT and/or XIT is activated the knob only controls the RIT/XIT frequency and not VFO A frequency.
73, Mike K2MK Mike-14-3 wrote > Playing with the P3 today I just noticed a bit of quirky behaviour. When > I turn the RIT/XIT button on the K3, whether RIT/XIT is on or off, I get > movement of the indicators on the P3. > > Split off, RIT/XIT off > Marker A, marker B and cuursor B move together > > Split off RIT on > Marker B (red), cursor B(magenta) and a very thin green line. If I > rotate the knob on the P3 there are artifacts left from what appears to > be the B marker. If I turn it very slowly, the artifact looks like a > very broad cursor(but not the real one). > > This is very hard to describe. > > Firmware 01.16. > > 73, Mike NF4L -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-quirk-tp7564482p7564490.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
