Hi Tim, The frequency counter in the KAT500 should work down below 5W for auto recall of antenna and last tune memory for a frequency. If you teach your KAT500 your antenna set up by tuning it on various frequencies above 10W (>20W is more accurate for best autotuning) it will recall these settings when you run QRP.
73, Eric www.elecraft.com _..._ On Nov 3, 2012, at 8:25 AM, "NZ8J" <[email protected]> wrote: > Just looked over the KAT500 manual and it appears from first glance that > it will not operate using a qrp power levels. Given the track record of > the current Elecraft tuners, I was very hopeful that it would so I could > utilize the antenna switching and superior tuning capabilities of the > Elecraft design in an automatic tuner. Maybe someone in the know can > chime in and give a definitive answer as to if it will operate reliably > using low power in the range of 3 to 4 watts. Keeping my fingers > crossed.. Hi hi :) > Thanks > Tim > Nz8J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
