Gary, The K42 may be fixed pitch, but the KX3 is not. Hold the pitch button and then turn the Keyer/Mic knob until the VFO B display shows 690 Hz.
73, Don W3FPR On 11/3/2012 7:51 PM, [email protected] wrote: > I have a KX3 and a K1EL K42 CW keyer/reader that I'm working on using > together. The only issue I'm having is in trying to get the two devices to > decode at the same place on the tuning dial. The K42 has a bandpass centered > on 690 Hz and the KX3 is slightly off of that point when you use the Spot > feature. My question is if the KX3 can be adjusted somehow to decode at 690 > Hz like the K42 or is it fixed at its sweet spot too. The K42 cannot be > adjusted or moved. Thanks, Gary A. - W0MNA > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
