George, Do not be so quick to pass judgement, there are several options in the power output path.
Remove the KAT1 - and do not forget to change the RF source jumper to the K1 position. After doing that, what is the power output on each band? If it is 5 watts or greater (usually 6 to 7 watts), then the K1 is working fine and the remaining problems will be found in the KAT1 or your antenna system. 73, Don W3FPR On 11/4/2012 10:33 PM, [email protected] wrote: > Had a great time but ran into trouble at the very end ....... Nothing on the > display of bars for power and when I try to auto tune it reads PO 1 then P lo > ..... ???? Blew a final ???? (had 146 Qs 57 sections in 9 hours of play) > Thanks !!! > George , N2JNZ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
