I'd like have function key that does what I find myself doing all the time. Today's PT0S pileup is an example. It's a monster that extends 10-15Khz
After tuning in the DX I often find a huge pileup that I'd like to see some detail on. To make that easier I move the DX to the left-most edge of the P3 display using the Center function then look to see if the pileup is overlapping the right edge. If needed I adjust the Span to see more of the band and capture all the pileup on the display then since Span affects the location of the DX I move the DX back to the left edge using Center again. It would be very helpful if there was a "Left Edge" function which would maintain the current frequency at that point and Span would work from that location. Obviously this is a byproduct of the fact that most DX works "up" rather than "down". I find the use of markers on an expanded display like this very helpful to discern the working pattern of the DX and let's me quite often "aim ahead of the duck" when placing my call. Any possibility for this? I've checked the owner's manual and the programmer's manual and didn't see anyway to do this with currently documented features. Thanks and 73 jim ab3cv ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
