To those of you who responded: Thanks! Operator error is my conclusion.
I did check continuity on the foot pedal and it is working just fine. This time when I pushed the RCA plug from the foot pedal back in, I pushed it in to be secure but did not over push. It keyed up the transmit just fine and I had correctly set the Mic input source for the back panel. I worked central Mexico from here in Washington with the headset and foot switch. That was fun; I like the foot switch. 73, Hoop On Wed, Nov 14, 2012 at 4:02 PM, J.K. Hooper <[email protected]> wrote It doesn't key the headset - it keys the transceiver ;) Is the TX LED not turning on when you actuate the footswitch? Have you tested the switch (with a continuity tester) to ensure that it is closing when actuated? Make sure you have it plugged into PTT IN and not KEY OUT.... 73, ~iain / N6ML ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
