> I just installed a KAT500 and a KPA500 (Merry Christmas to me). I installed > the auxiliary cables between K3 and tuner and amp. Coax and power to tuner > amp and rig. Now I'm in trouble. The manual and my brain don't connect. > > Here's the problem. When I push "tune" on the KAT500 the auto light continues > to flash. No indication of SWR. When I push tune on the K3 it tunes - no > indication on KAT500. I've put the tuner on the K3 into bypass. No change on > KAT500 when I push tune on it. > > Help! > > I haven't even started to play with the KPA500. At the moment I'm confused as > to setting the drive levels for the amp and how to set the power on the K3 so > it will work independently when the amp is off. I guess I need a 16 year old > in the house. (There is no plate and load knobs!) > > Thanks for any step-by-step help. > > Bob, N6PGQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
