Hi Mark, I had my P3 mounted directly on top of my K3 for about a year with no problems. The K3 is tilted so to keep the P3 in place I laid some black shelf liner on top of the K3. I cut the liner to reveal the speaker and ventilation holes. I was able to push all of the buttons on the P3 without it moving around. I used shelf liner from Home Depot and it is non-adhesive and made in a waffle pattern with holes punched through.
The speaker was slightly muffled but I use headphones most of the time anyway. My QRZ page shows how it looked. I now have the P3 to the left of my K3 because I added the SVGA option and I put an LCD monitor on a swivel arm overhanging the K3. 73, Mike K2MK [email protected] wrote > I would like to purchase a P3 in the future to go with my K3. But I don't > have too much room left on the table to mount them side by side. Does > anyone know of a desktop stand that I could mount the K3 on the bottom and > the P3 on the top? Any help would be much appreciated. Mark KB3Z -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Desk-Top-Stands-tp7565885p7565892.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
