http://vk4tux.no-ip.org/K3%20rigcat/K3.xml
for rigcat option -----Original Message----- From: david Moes <[email protected]> To: [email protected] Subject: Re: [Elecraft] PSK31 neophyte needs help please! Date: Fri, 23 Nov 2012 21:57:31 -0500 > > What do I do to enable fldigi to read the frequency from the K3? In FLDigi select Configure and choose rig control. Then select the Hamlib tab In that window check the "use Hamlib" button, then in the rig menu box select the "Elecraft K3 (beta)". The Device should be the com port that the K3 is connected to. Set the baud rate to the same as it is set on the K3. sideband: to rigmode The rest of the default values should work. including PTT via Hamlib command should be checked then under Harware PTT tab make sure that all boxes are unchecked. At this point click initalize it should connect and you should see the frequency read out. be sure to click save and close. If it fails FLDigi may hang and show 'not responding' for half a minute or so. if this happens check that the port and baud settings are correct and that there are no other applications using the same Com Port. you will find FLDigi will now be able to put the K3 into transmit for you as well without the PTT connection, this is done through a command being sent via the serial port rather than PTT or using the RTS/DTS. if its working close the program and reopen it. this will permanently save the changes. rig control is somwhat limited in FLdigi you can change mode and QSY if you want more control you can use FLRig. the windows version is a little limited vs the Linux version but it still works quite well for basic rig control. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
