.not a very careful read on my part.please pardon. Dick - KA5KKT ---------------------------------------------------------------------
If the KX3 is like the K3, there is an SMTR MD setting for AbS (absolute). This can help provide the same S-Meter reading regardless of preamp or attenuation. Hope that helps. 73, Dick - KA5KKT I have verified that my KX3 S-Meter is calibrated to s9 under -73db signal WITH preamplifier active. Without preamplifier, in normal mode, signal is about s6. There is a smtd md funcition that shoud take an avarage signal but it is still inactive (TBD) with the latest firmware installed. Is there a particular reason to take s9 with preamplifier active ? I would prefer to have s9 in normal mode (pre off) but seems there is no way to have this. Is there any way to recalibrate the s-meter signal in this way ? tnks in advance best 73, iw2esl Giampiero ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
