I think what happens is that the K3 puts out rf faster than the KAT500 can interrupt the key line when it goes into the tune mode. Using the key line interrupter on the cable is really only for bringing the key line out of the cable to include other non-Elecraft key lines in series. So...the only thing I can think of at the moment is to break the key line somehow when using the cable interrupter and press-hold of the xmit (the "tune") button. The K3 has to do it when pressing the "tune" button. Is there some way of doing that in menu?
Sent from my iPad Chuck, KE9UW (Jack for BMW motorcycles) On Dec 6, 2012, at 3:53 PM, "Roy Morris" <[email protected]> wrote: > I have connected the cables as shown on page 6 of the KAT500 Automatic > Antenna Tuner Owner's Manual, revision B3, November 20, 2012. I am > connecting the K3, KPA500 and KAT500 using the DB15 interface cables and the > two RCA (yellow end) cables for the separate key line. This diagram shows > the key line interrupter inserted between the DB15 cable and the K3 ACC > socket. I have not inserted the key line interrupter, and the system seems > to work fine. However, I DO have to change the KPA500 from OPERATE to > STANDBY when changing frequency because leaving it in the OPERATE position > may cause the amp to FAULT when I hold the XMIT button on the K3. I believe > the tuner is trying to search with high power. I wonder if inserting my key > line interrupter would prevent this. All frequencies had been previously > memorized by the KAT500. Thanks. Roy Morris W4WFB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
